servo reducer
works? In a nutshell, it means reducing the rotational speed, increasing the torque, and decreasing the inertia. A gear reducer achieves the purpose of speed reduction by using the transmission of gears at various stages. A reducer is composed of gear pairs at various levels. For instance, using a small gear to drive a large gear can achieve a certain degree of deceleration. By adopting a multi-stage structure like this, the rotational speed can be significantly reduced. Gear reducers are generally used in transmission equipment that requires low speed and high torque. They achieve the purpose of deceleration by meshing the small gear on the input shaft of the reducer with the large gear on the output shaft, which is powered by an electric motor, internal combustion engine or other high-speed rotating power. Ordinary reducers also have several pairs of gears with the same principle to achieve the ideal deceleration effect. The ratio of the number of teeth of the large and small gears It‘s the transmission ratio.

servo reducer
is a kind of dynamic convey institutions, using the gear speed converter, A mechanism that reduces the rotational speed of the motor to the desired rotational speed and obtains a larger torque. Reduce the speed while increasing the output torque. The torque output ratio is calculated by multiplying the motor output by the reduction ratio, but it is important to note that it must not exceed the rated torque of the reducer.  ; Deceleration simultaneously reduces the inertia of the load, and the reduction in inertia is the square of the deceleration ratio. Everyone can take a look. Generally, motors have an inertia value. The types of reducers generally include helical gear reducers (including parallel shaft helical gear reducers, worm gear reducers, bevel gear reducers, etc.), planetary gear reducers, cycloidal pinwheel reducers, worm gear reducers, planetary friction mechanical stepless speed changers, and so on.  ; Currently, the reducers with relatively good performance: The working principle of reducers varies depending on the type of reducer. Currently, the planetary gear reducer has relatively good performance. The transmission mechanism of the planetary gear reducer is gears. The servo motor drives the sun gear of the reducer, and the sun gear then drives the planetary gears supported on the planetary arm frame. The planetary gears transmit power through meshing with the outer gear ring. The output shaft connected to the external gear ring is driven to achieve the purpose of deceleration. The deceleration ratio is related to the specification of the gear train.